Watch our PCF agent turn a messy BoM into ISO 14067 product carbon footprints

Melina Hürzeler

|

November 18, 2026

Blog post main image
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

‍

Key takeaways

‍‍

Our product carbon footprint (PCF) agent turns a messy bill of materials (BoM) into clean product data and asks before it changes anything.
‍

In our demo, one SAP export becomes five ISO 14067-compliant PCFs, each fully auditable.
‍

Try it free on up to three of your own products, while spots last.
‍

‍

At forward earth, we gave our PCF agent a bill of materials exactly as it came out of SAP: German column headers, five spellings of "piece", country names written out in full, and a labour row and an electricity row mixed in with the parts. The video above shows what happened next.

‍

Teams can now run the same workflow on their own data. We are opening free access to our PCF agent: upload a BoM and calculate up to three product carbon footprints, with ISO- and PACT-compliant reports to export.

‍

Why a messy BoM is the right place to start


Customer PCF requests now arrive with RFQs (requests for quotation) and supplier questionnaires, because buyers are chasing the emissions that sit in their supply chains. In a 2024 report by CDP and Boston Consulting Group, corporates' Scope 3 supply chain emissions were, on average, 26 times greater than their emissions from direct operations. The data to answer these requests already sits in the ERP system. The difficulty is its shape. A BoM export carries the habits of the plant that produced it: local units, countries written in full, subtotal rows, and labour and energy lines next to physical parts. Cleaning that by hand before any calculation can start is a large part of why manual PCF work takes weeks per product.

‍

We treat that mess as the normal starting point. The agent takes the file as it is, does the groundwork, and leaves every decision that counts with the team.


What does our PCF agent do with a messy BoM?


Our PCF agent is an AI agent inside our platform that turns a raw BoM export into fully auditable product carbon footprints. It reshapes the data, matches each line to an emission factor, calculates PCFs at scale in minutes, compliant with ISO 14067 and PACT, and asks for approval before any change takes effect.

‍

Here is what it did in the demo, step by step:

‍

  1. Imports the BoM as it is. The agent converts units ("ST", "Stk" and "Stück" all become "pcs"), turns country names into ISO codes, and leaves out the labour row, the electricity row and the subtotal. Where the file is ambiguous, it asks: what to do with two identical bolt rows, and which quantity to use for an approximate gear oil entry. Nothing reaches the platform until someone clicks Approve.
  2. Calculates the PCFs. Asked for ISO 14067, cradle-to-gate, for 2025, the agent checks which production site to assign, fills missing energy data with labelled estimates, and calculates all five products.
  3. Explains and corrects emission factor matches. For the motor, the agent lists every match with a confidence level and its reasoning. When the user points out that the bearing is made from low-alloyed steel rather than chromium steel, the agent swaps in the matching ecoinvent factor and recalculates.
  4. Generates the report. One request produces the ISO 14067 report for the motor, ready to download. The agent generates reports automatically, and teams can customise them.
  5. Finds hotspots and models scenarios. The agent breaks the motor's footprint down by material, supplier and lifecycle stage, then models changes as separate scenarios while the official footprint stays untouched.

‍

The two scenarios from the demo show why hotspot data should come before any change to a specification:
‍

Scenario on the motor (footprint excluding biogenic CO2) Original (kg CO2e per piece) Scenario (kg CO2e per piece) Change
Use 10% less enamelled copper magnet wire 141.97 141.69 0.2% lower
Source the cast aluminium frame from a low-carbon supplier (4.0 kg CO2e per kg) 141.97 129.29 8.9% lower

‍
Cutting copper wire by a tenth barely moves the result, while switching one supplier for one part cuts almost 9%. The agent runs these scenarios at product portfolio level too, so procurement and product teams can rank the changes that move the most emissions across the whole range. For the three agents behind this workflow, see our page on agentic workflows for carbon calculations.


What stays with your team


Emission factor matching is the step where review matters most, so our agent shows a confidence level and its reasoning for every match, and a person approves the result.


Every change the agent proposes appears as an approval card listing the action and the records affected, with the options Approve, Review first and Cancel. Estimates carry a label, so the team knows which values to replace with supplier data later, and every emission factor match stays traceable to its source database or a supplier. 

‍

The agent does the groundwork, and the people who sign off on the numbers stay in charge of them.


Does the agent also work for CCF and CBAM?


Yes. The same agent works on corporate carbon footprints (CCF) and CBAM, the EU’s Carbon Border Adjustment Mechanism, with the same approval step before anything changes. Teams upload a general ledger export or their customs declarations as they are, and the agent prepares the data, calculates the result and shows what drives it.
‍

  • Corporate carbon footprint. Teams upload their data as it is, and the agent reads the transactions, matches them to emission factors and flags mixed invoices for a check. The result is a company footprint under the GHG Protocol, split into Scope 1, 2 and 3, with the largest Scope 3 categories ranked.
  • CBAM. Teams upload customs declarations with CN codes (the EU’s customs product codes), volumes and countries of origin, and the agent calculates the CBAM certificates and their estimated cost on EU default values. It then shows which suppliers drive most of that cost. Once a supplier sends verified actual values, these replace the default in the calculation and the cost updates, so the number sharpens as real data arrives.


Free access currently covers product footprints only. To see the agent on your company footprint or CBAM data, book a demo with our team.


What the free access includes

‍

  • You upload your BoM as it comes out of your ERP system, without reformatting it first.
  • Our agent calculates up to three product carbon footprints, compliant with ISO 14067 and PACT.
  • Every result is fully auditable, with each emission factor match explained.
  • You export customisable ISO- and PACT-compliant reports to share with customers.

‍

To request access, fill in the short form on our free-trial page with your name, company and the products you want to calculate. We review each request and send an email invitation once we approve it. Spots are limited, and with the current volume of sign-ups a reply can take a few days.

‍

Once the first three footprints are in, the same workflow scales to the full product carbon footprint platform, with up to 1,000 products per batch.

‍

The quickest way to judge a PCF agent is to give it your own messy BoM and see what comes back.

‍

Try our PCF agent for free or book a PCF demo with our team.

‍

FAQ


What is included in the free PCF trial?
‍

The free access covers up to three product carbon footprints calculated by our agent on your own BoM. Results are fully auditable, and you can export ISO- and PACT-compliant reports. We review each request and send an email invitation, and spots are limited.


Do I need to clean my BoM before uploading it?
‍

No. Upload the file as it comes out of your ERP system: the agent converts units and country names, leaves out rows that are not materials, and asks before it decides anything ambiguous. It then shows every change it made to the file before anything is written, so the team can check the result.

‍

Are the results compliant with ISO 14067 and PACT?

‍

Yes. Our calculations are compliant with ISO 14067:2018, PACT v3.0 and the GHG Protocol Product Standard, and aligned with the Catena-X PCF Rulebook v4.0. The exports include an ISO 14067-compliant Excel report covering the standard’s Section 7 reporting fields and a PACT-compliant CSV.

‍

How accurate are the footprints?
‍

Accuracy depends on the quality of the input data, the emission factor selection and the review. The agent shows a confidence level and its reasoning for every match and labels every estimate, so the team can see where better data, for example from suppliers, will improve the result over time.

‍

What happens after the three free PCFs?

‍

The same workflow runs on our full PCF platform, which calculates up to 1,000 products per batch. Book a PCF demo and we will walk through your portfolio and what a first rollout could look like.

‍

Sources
‍

‍

‍

Read more blogs